A SKETCH SECTION OF THE GEOLOGY AROUND CLAPHAM.
[Image: A geological cross-section diagram showing the subterranean rock layers and surface landmarks near Clapham.
The diagram features several distinct geological layers:
- Summit of Ingleborough: The highest point on the left, topped with a dark layer.
- YOREDALE SERIES: A layered section below the summit, consisting of alternating horizontal beds.
- Limestone: A thick, brick-patterned layer below the Yoredale Series. It features surface "pavements" and contains "Gaping Gill" (a vertical shaft) and "Ingleborough Cave."
- OLD BASEMENT BEDS: A large, slanted-hatch patterned section beneath the limestone, described as strongly folded beds of slate.
- MILLSTONE GRIT: A solid dark layer on the far right, separated from the limestone by the "South Craven Fault."
- Drift: Small patches of "drift" (glacial deposits) are noted on the surface.
Key surface locations marked from left to right include: Summit of Ingleborough, Gaping Gill, pavements, Ingleborough Cave, Lake, and Clapham Village.
Two vertical fault lines are identified: the "North Craven Fault" (dividing the Old Basement Beds from a limestone block) and the "South Craven Fault" (dividing that limestone block from the Millstone Grit).
In the bottom left corner, there is a small "Location map" showing a line of section running from Ingleborough summit past Gaping Gill, Ingleborough Cave, and the Lake to Clapham Village.
A scale bar at the bottom indicates a distance of 0 to 2 kilometres/miles, with a note stating "VERTICAL SCALE EXAGGERATED".]
MILLSTONE GRIT: a coarse grained sandstone. YOREDALE SERIES: a series of alternating beds of sandstone, shale and limestone. LIMESTONE: a massive, grey coloured rock, made from the remains of sea creatures. OLD BASEMENT BEDS: strongly folded beds of slate. DRIFT: a thin, surface coating of glacially derived deposit.
North Craven Fault. South Craven Fault.
SCALE 0 kilometres 1. 2. 0 miles 1. VERTICAL SCALE EXAGGERATED